Maintenance
■SHOULDER STRAP
•If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap.
•Pass the top end of the strap through the hanger, making the FLAPPED SIDE OUTSIDE.
•Pull the end of the strap through the ring, on the strap, and then push the ring towards the hanger as close as possible.
WARNING
•The flap on the end of the strap works as a stopper. Never install the strap with the flapped side inside, or the unit may fall from the operator, which could result in injury to the operator and/or damage to the unit.
NOTE
•Never use a blower which is not properly repaired or remodeled.
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.
2.Remove the spark plug and drop a spoonful of
