RedMax EBZ7150RH manual Transport, Fuel safety, Storage, Avoid noise problem

EBZ7150/RH

5. For safe operation

WARNING

2.Before starting operation, always make sure to check if any obstacles are left inside the volute case and net. The obstacles may cause damage on fan and volute case and serious injury.

3.Check to see if the shock-absorbing rubber mount has become cracked or otherwise damaged. Note that failing to replace this rubber mount when it has become cracked or damaged may cause the engine to come loose from its frame during use, thus resulting in possible serious bodily injury. If cracked, be sure to replace without delay.

4.Check the work area that the blower will be used in and remove or cover all valuables that may be damaged by the air blast or thrown debris.

■Using the product

1.To reduce the risk of injury associated with thrown objects.

a:Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away.

b:Use the full blower nozzle extension so the air stream can work close to the ground.

c:Do not allow bystaders in work area.

d:Do not point the blower tube in the direction of people or pets.

e:Always check to be sure that no debris has been blown onto someone else's property.

f:Pay attention to the direction of the wind, do not work against the wind.

g:Never point a blower tube toward an open flame to avoid the possibility of igniting the unit, causing injury to yourself or damage to surroundings.

2.To minimize blowing time.

a:Use rakes and brooms to loosen debris before blowing.

b:In dusty conditions, slightly dampen surfaces.

c:Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches and gardens.

3.If you detect abnormal vibration or noise during operaion, promptly stop the blower and check whether something has broken.

If a breakdown has occurred, do not operate the blower until the problem is fixed.

4.After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles.

■Transport

1.Drain the fuel from the fuel tank before transporting or storing the blower.

2.Secure the unit carefully to prevent movement when it is transported.

3.A unit that receives a strong shock during transport and unloading may malfunction.

■Fuel safety

1.Always use caution when handling fuel. It is highly flammable. Wipe up all spills and then move the blower at least 10 feet (3 meters) from the fueling point before starting the engine.

2.Eliminate all sources of sparks or flame (i.e. smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

3.Do not smoke while handling fuel or while operating the blower.

4.Do not refuel a hot engine.

5.Do not refuel a running engine.

6.Keep the handles dry, clean and free of oil or fuel mixture.

7.Always store fuel in an approved container designed for that purpose.

■Storage

1.Always store the blower and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric moters, relays/switches, boilers and the like.

2.For longer period of storage, the fuel tank should be emptied.

3.When storing the blower, choose a space indoors free from moisture and out of the reach of children.

■Avoid noise problem

IMPORTANT

Check and follow the local regulations as to sound level and hours of operations

for blower.

1.Operate power equipment only at reasonable hours not early in the morning or late at night when people might be disturbed. Comply with times listed in local

US-6