HEZ2650F

8. Operation

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE (OP4)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the stop switch to the "STOP" position.

IMPORTANT

OP8

■HOW TO USE

WARNING

1. Always wear eye protection such as

U

safety goggles. Never lean over the

S

rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2.Keep the blade guard and the mad guard attached in place at all times when the unit is operated.

3.Before starting a job, check the area and remove all obstacles and objects that could be thrown by the blade.

4.Do not adjust the wheel height or try to remove anything entangled to the blade with the engine running.

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

1.

Before starting the engine, adjust the

 

wheel height for desired cutting depth

 

(See page 12).

2.

Before starting a job, plan your

OP6

 

.04 in

 

(1~2mm)

(1)

■ADJUSTING THROTTLE CABLE

• The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP6)

(1) cable adjuster

direction of travel so that you can

always hold the edger on you right side

and can walk on a hard surface as

much as possible.

3. When starting to edge, maintain the

engine speed at the level required to

perform edging work, and slowly have

the blade cut into the edge groove.

OP7

(1)

■ADJUSTING IDLING SPEED (OP7)

1. When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2. When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) idle adjusting screw

NOTE

• Before edging, make sure the area is

soft enough so the blade does not bog

down.

• Do not move the edger into the work so

fast that the engine or blade bogs

down.

NOTE

•Warm up the engine before adjusting the idling speed.

• Do not operate using starting throttle

lock. It may cause unit uncontrolled,

and clutch failure.

• Use care indirecting discharge to avoid

bystanders, vehicles, glass, and the

like.

• When the blade guard is clogged or

blade stuck, stop the engine and clean

it.

US-13

Page 12 Page 14
Page 13
Image 13
RedMax HEZ2650F manual Stopping Engine OP4, OP8 HOW to USE, OP6, Adjusting Throttle Cable, Adjusting Idling Speed OP7
Page 12 Page 14

HEZ2650F specifications

The RedMax HEZ2650F is a high-performance, lightweight backpack blower designed for professionals and homeowners who require an efficient and powerful tool for yard maintenance and landscaping tasks. Built to excel in various conditions, this versatile blower combines advanced technology with user-friendly features, making it a top choice in the market.

One of the standout features of the HEZ2650F is its robust engine. Powered by a reliable 25.4cc two-stroke engine, the blower delivers an impressive air velocity of up to 180 mph, providing the power needed to clear leaves, debris, and grass clippings with ease. The engine is designed to be fuel-efficient, allowing for longer run times without frequent refueling, making it ideal for extended work sessions.

The innovative Design of the HEZ2650F incorporates RedMax's advanced air flow technology. This technology optimizes the air intake and exhaust systems, ensuring that the blower operates at maximum efficiency. As a result, users can expect powerful performance without sacrificing fuel economy, which is crucial for both commercial users and dedicated homeowners.

Comfort is another key consideration in the design of the HEZ2650F. The backpack design distributes weight evenly across the user's back, significantly reducing fatigue during prolonged use. Additionally, the padded shoulder straps and ergonomic handle provide added comfort, allowing users to maneuver the blower effortlessly in tight spaces.

The blower is equipped with a cruise control feature that enables users to maintain a consistent airflow without having to hold down the throttle trigger constantly. This feature enhances productivity and allows for longer periods of operation without fatigue. Moreover, the lightweight construction of the HEZ2650F makes it easier to handle, even for those who may not be accustomed to operating heavy machinery.

Durability is also a hallmark of the RedMax HEZ2650F. Its rugged design is built to withstand the rigors of professional use, ensuring that it can handle tough landscaping tasks season after season. The blower's components are crafted from high-quality materials that resist wear and tear, enhancing its longevity.

In summary, the RedMax HEZ2650F is an outstanding backpack blower that combines a powerful engine, advanced air flow technology, and user-focused features. With its lightweight design, comfort enhancements, and durable construction, it stands out as one of the best options for anyone looking to maintain their outdoor spaces efficiently. Whether for professional landscapers or dedicated homeowners, the HEZ2650F is a reliable choice for effective yard care.
Top Page Image Contents