HEZ2450S/HEZ3050S
6. Set up
■MOUNTING OTHER PARTS
SE1 |
1. Insert the driveshaft into the clutch drum, then attach the gearbox to the shaft tube as aligning the positioning holes and fasten the screw (A). Fasten
U
(A) | (B) |
|
the clamp bolt (B) firmly. (SE1)
(A)Screw
(B)Clamp bolt
(B)Tightning Torque: 70~130 in-lb (8~15 N.m)
S
SE2 |
2.Install the handle to the shaft tube and clamp at a position best for your job. (SE2)
