Fuel

WARNING

Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling stop before starting the engine.

The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available. Use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use.

RECOMMENDED MIXING RATIO

GASOLINE 32:OIL 1

Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

32:1 MIXING CHART

GASOLINE

gal.

1

2

3

4

5

 

 

 

 

 

 

 

2-CYCLE OIL

fl.oz

4

8

12

16

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GASOLINE

liter

1

2

3

4

5

 

 

 

 

 

 

 

2-CYCLE OIL

ml

32

64

96

128

160

 

 

 

 

 

 

 

• These engines are certified to operate on unleaded gasoline.

•Make sure to use gasoline with a minimum octane number of 90 ROZ(USA/Canada : pump octane min.87)

Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

•Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

HOW TO MIX FUEL

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour in the rest of gasoline and agitate again for at least one minute.

5.Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers.

6. Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3. OIL FOR 4-CYCLE ENGINE USE or

WATER COOLED 2-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4. Mixed fuels which have been left unused for a period of one month or

more may clog the carburetor or result in the engine failing to operate properly.

9

Page 11
Image 11
RedMax CHT2300B, HT2300A, CHT2300L manual Recommended Mixing Ratio Gasoline 32OIL, HOW to MIX Fuel, Fueling the Unit

HT2300A, CHT2300L, HT2300L, CHT2300B specifications

RedMax has established itself as a reliable brand in the outdoor power equipment market, delivering robust tools for landscaping and maintenance. Among their product lineup, the RedMax CHT2300B, HT2300L, CHT2300L, and HT2300A models stand out for their performance, versatility, and user-friendly design, making them popular choices for both professionals and homeowners.

The RedMax CHT2300B is a powerful hedgetrimmer equipped with a 21.7cc 2-stroke engine, delivering ample power for tackling dense hedges and shrubs. Its dual-action blades provide smooth cuts, reducing vibrations and enhancing precision. The ergonomically designed handle improves comfort, allowing for extended use without fatigue. The CHT2300B also features an adjustable cutting angle, enabling users to reach hard-to-access areas and create intricate shapes.

In contrast, the HT2300L model is a pole saw designed specifically for high branches and overhead trimming. With a lightweight yet sturdy design, it features a 1.3 kW engine that ensures reliable performance even in tough conditions. The telescopic pole extends up to 3.5 meters, allowing users to reach significant heights without the need for ladders. The HT2300L is equipped with a sharp, durable cutting head that swiftly handles branches up to 25mm thick, making it perfect for professional landscapers and garden enthusiasts alike.

The CHT2300L shares many similarities with the CHT2300B but adds a few enhancements. With its longer blade length, it offers improved reach and efficiency when trimming expansive hedges. This model boasts a powerful 21.7cc engine, emphasizing RedMax's commitment to performance and reliability. The lightweight design, combined with an anti-vibration system, ensures operator comfort, making extensive trimming tasks manageable.

Finally, the HT2300A model is another remarkable addition to RedMax’s line of pole saws. It combines a high-performance engine with innovative technology to deliver high cutting speeds. The adjustable angle head allows for precise cuts, and its durable design ensures longevity even under frequent use. The HT2300A is also engineered for ease of use, with a simple start system and controls positioned for intuitive operation.

In summary, the RedMax CHT2300B, HT2300L, CHT2300L, and HT2300A models are exemplary tools that showcase the brand's dedication to quality and innovation. Whether you're a professional landscaper or a DIY gardener, these machines offer the performance, durability, and user-friendliness needed to keep your outdoor spaces looking their best.