Redring SB

Tank access and replacing parts con’t.

Task

Operation

Replace Thermistor Steam Sensor

1.

Directions as above in Cover Removal.

 

 

2.

Remove PCB cover plate.

 

 

3.

Remove the thermistor.

 

 

4. The probe end of the thermistor pushes into the

 

 

 

condensor tube so that the tip just covers the hole

 

 

 

drilled in the condensor tube.

 

 

5.

Re-connect the sensor to the PCB at either NTC 1 or

 

 

 

NTC 2, in any order.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Condensor Tube

Sensor Probe

Page 6 of 8

Page 6
Image 6
Redring 1070810E, 1070835E manual Tank access and replacing parts con’t, Drilled in the condensor tube, NTC 2, in any order