2. Attach the Rear Stabilizer (3) to the Frame (1) | 2 |
| |
with two M8 x 63mm Bolts (16), two M8 |
| ||
| 16 | ||
Washers (20), and two M8 Nylon Locknuts (24). |
| ||
| 3 | ||
Do not tighten the Nylon Locknuts yet. | 20 | ||
| 1 | 24 | |
|
| ||
3. Attach a Dumbbell Tube (10) to the Rear | 3 | 13 | |
Stabilizer (3) and the Front Leg (2) with two M8 | |||
| |||
x 80mm Screws (13) and two M8 Washers |
| 20 | |
|
| ||
(20). Do not tighten the Screws yet. |
|
| |
Attach the other Dumbbell Tube (10) in the |
| 3 | |
same way. |
| ||
Tighten the four M8 x 80mm Screws (13). |
| 10 | |
|
| ||
See steps 1 and 2. Tighten the four M8 Nylon | 2 |
| |
Locknuts (24). |
| ||
|
| ||
| 20 |
| |
| 13 |
| |
4. Orient the Pivot Bracket (6) as shown and | 4 |
| |
attach it to the Backrest Frames (5) with four |
| ||
|
| ||
M8 x 38mm Bolts (18) and four M8 Nylon |
|
| |
Locknuts (24). Do not tighten the Nylon | 5 |
| |
Locknuts yet. |
| ||
| 18 |
| |
|
| 5 | |
|
| 18 | |
|
| 6 | |
| 24 |
| |
|
| 24 | |
| 7 |
|
