Reel Mowers, Etc MM-1 owner manual Adjusting the Cutting Height

Owner’s Manual — Sunlawn MM-1

2.Fit the lower section of the handle so that the holes are over the handle posts on the mower. Then rock the handle to align the locking tabs and allow the handle section to fit into place.

Bottom Handle Mount Hole

Top / Middle Handle Mount Hole

3.Continue assembly of the middle and top sections of the handle using the handle bolts and wing nuts.

OPERATION

ADJUSTING THE CUTTING HEIGHT

The cutting height of the MM-1 may be adjusted from approximately 1/2 inch up to approximately 2 1/4 inches. Actual height may vary according to the height of the turf. Adjust the mower to the desired height as follows:

1.Loosen the two large black knobs, one on each side of the mower body, to allow movement of the roller arms. NOTE: the handle is mounted to the roller arms and thus moves with the arms.

3