Regency E33-LP1, E33-NG1 dimensions Combustible Mantels, Clearances to Combustibles

Gas Inserts

E33 Gas Insert

Clearances

Unless otherwise stated the clearances listed below are Minimum distances to combustible materials. Please Note: A major cause of chimney related fires is due to a failure to maintain required clearances (air space) to combustible materials. It is of the greatest importance that this fireplace and vent system be installed only in accordance with these instructions.

Clearances to Combustibles

Dimension	Description	E33
A*	From Unit to Side Walls	8” (203mm)
B	From Unit to Ceiling	47” (1194mm)
C	Minimum Mantel Height	15” (381mm)
D	Maximum Mantel Depth	12” (305mm)
E	Alcove Width	76” (1930mm)
F	Alcove Depth	36” (914mm)
G	Hearth Height	1-¼” (32mm)
H	Hearth Width	45-½” (1156mm)
I	Hearth Depth	13” (330mm)

* Alcove side wall must have a minimum of 8” (203mm) clearance on one side.

Gas Inserts

Combustible Mantels

Because of the extreme heat this fireplace emits, the mantel clearances are critical. Combustible mantel clearances from top of the louvers are shown in the diagram below. Mantel may be installed anywhere in the shaded area or higher.

D

128

	Flush Front Mantel Clearances
		12	10	8	6	4	2	0
	20			12" (305mm) Mantel
	18
	16		3-1/2" (89mm) Mantel
47”	14
(1194mm)
to ceiling	12		20”
	10
		(508mm)
	8						15”
						(381mm)
	6
	4
	2
	0
						Top of
		25" (635mm)					Unit
		to floor

Side View

Full Screen Door Mantel Clearances

Note: A non-combustible mantel may be installed at a lower height.

Note: Ensure the paint that is used on the mantel and the facing is “heat resistant” or the paint may discolour.

June 2007 Regency Product Specifications Book