TV CONNECTION - S-Video
DVD Home Theater System + TV with Audio/Video Input Jacks and
NOT USED
AUDIO CABLES (not included)
R L
YOUR TV SET 
NOTE: Yellow plug and wire are not used when using
1.Insert the audio cables into the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your TV set, and into the corresponding AUX IN jacks on your DVD HOME THEATER. This will enable you to hear your regular TV shows through your DVD HOME THEATER SYSTEM when not playing DVDs. (This is optional, you do not need to do this step if your TV set has good sound.)
NOTE: On some TVs, the AUDIO OUTPUT jacks may have no signal. On those TVs’, you may activate these jacks by using your TV’s REMOTE (not the CABLE or SATELLITE remote) and selecting the correct AUDIO OUT (on some TV’s, select AUDIO OUT to fixed). Please see your TV’s manual for details.
NOTE: The TV sound will come out of 5 speakers plus subwoofer since the factory’s default setting for the sound output is “PRO LOGIC”. Press the SURROUND button if you want to return back to STEREO sound output, and the sound will only come out of 2 speakers plus subwoofer.
2.Insert the
3.Insert the AC power cord into an AC outlet.
4.Press the POWER button on the main unit.
5.Go to Page 22 for playing DVDs (discs).
NOTE: Your cable or antenna connection to the television will not be affected by this connection. Connect your antenna cable to your television as you normally would. You may need to consult your television manual for details, but no changes will be made to your current antenna connections.
10 |
| |
|
