9
110939
OWNER’S MANUAL
For more information, visit www.desatech.com
REPAIR SERVICE
Note:
Only use original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
Each Authorized Service Center is indepen-
dently owned and operated.
For additional Service Center or warranty
information, call 1-800-858-8501 or visit
our Technical Service web site at
www.desatech.com.

WARRANTY SERVICE

If product requires warranty service, return it
to nearest Authorized Service Center. You
must show proof of purchase. If faulty mate-
rials or workmanship caused damage, we
will repair or replace product without charge.
Note:
Normal wear, misuse, abuse, neglect,
or accidental damage is not covered under
warranty.

NON-WARRANTY SERVICE

If product requires service, return it to near-
est Authorized Service Center. Repairs will
be billed to you at regular repair list prices.
TECHNICALSERVICE
You may have further questions about as-
sembling, operating, or maintaining this
product. If so, you can visit our Technical
Service web site at www.desatech.com
or contact our Technical Service Depart-
ment at 1-800-858-8501 (English Only).
You may also write to:
DESA Specialty Products™
ATTN: Technical Service Specialty Products
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Specialty Prod-
ucts™, have ready
•Your Name
•Your Address
•Your Phone Number
Model Number of Product
Date of Purchase (Include copy of receipt
for written requests).
REPLACEMENTPARTS ANDACCESSORIES
For original replacement parts and accesso-
ries, contact your nearest Authorized Dealer
or Authorized Service Center for this prod-
uct. If they can not supply the part or acces-
sory, contact your nearest Parts Central listed
on page 12. Each Authorized Dealer, Au-
thorized Service Center, and Parts Central is
independently owned and operated.
See pages 10 and 11 for an Illustrated Parts List.
If you need additional referral information,
contact our Technical Service Department
(see Technical Service).
In Canada call 1-800-561-3372 for parts
information.
Note:
If binding occurs after reassembly,
repeat all of the previous steps making sure
that cam aligns properly with cutter blade
assembly.
WARNING: All components
must be installed and securely fas-
tened before plugging pole trim-
mer into power supply. Failure to
do so may cause product damage
or serious personal injury.
5. Remove screw that holds down cutter
blade assembly (see Figure 19).
SERVICING POLE
TRIMMER

(Continued)

6. Lift and twist the cutter blade assem-
bly to disengage from cam, being care-
ful not to rotate cam.
Note:
The cam is
not secured by any fasteners. If cam lifts
off with cutter blade assembly, replace
cam with large diameter flange facing
downward toward trimmer power head
before replacing cutter blade assembly.
7. Remove the same two 5/16" nuts from
the new cutter blade. Align cutter blade
slots and fit onto cam.
8. Replace screw from Step 5. Tighten se-
curely.
9. Replace the cam cover and secure the
two 5/16" nuts from Step 6.
Note:
When properly aligned, cam cover fits
into recess of motor housing.
10. Replace the bottom cover and secure
with the 4 bottom cover screws. Tighten
screws securely.