2
WARNING:
Safety Precautions
BEFORE USING
1. ALWAYS handle the tool as if it
were loaded. Before starting work,
check that the tool is unloaded and
the muzzle is clear. NEVER load a
tool unless it is going to be used.
2. ALWAYS inspect to make sure the
tool is working properly. If the tool
does not work properly or is dam-
aged remove from service and tag
DEFECTIVE.
3. Operators and bystanders must
ALWAYS wear goggles and ear
protection that meet or exceed CE
standards.
4. ALWAYS clear the work area on all
sides and post appropriate warning
signs on job sites.
The following pages contain detailed
warnings, cautions, and rules of safe
operation. Read carefully and become
familiar before operating to avoid seri-
ous injury. We expressly disclaim any
liability for any injury to persons or dam-
age to property which result from your
failure to take the precautions contained
in this manual.