Operating Instructions
1.This hair dryer is provided with an appliance leakage circuit interrupter (ALCI) safety device built into the plug. This device is designed to make the unit inoperable under some abnormal conditions, such as accidental immer- sion in water. The ALCI safety device is equipped with a test button so that its operation can be checked.
This unit should be tested before each use to confirm that the safety device is operational.
TO TEST:
After plugging in your hair dryer:
A. Press the reset button on the ALCI device.
B. Press the test button. The reset button will pop out. This verifies that the safety device is operating properly.
C. Press the reset button to reactivate your ALCI safety device.
D. Your hair dryer is now ready for use.
Note: This unit may automatically trip when unplugged. If so, unit must be reset after it is plugged in. After following the above testing procedure, should the indicator device not function properly, return the dryer to Remington Customer Service for examination and repair or replacement.
2.Should the ALCI safety device trip (i.e., reset button pop out) during use, press the reset button. Should the dryer fail to reset, return the dryer to Remington Customer Service for examination and repair or replacement. Never operate this appliance if it has been dropped in water; return it to Remington Customer Service for examination and repair or replacement.
3.The dryer is designed to work on ordinary household current only, 125 volts A.C.,
60 Hz. It is not intended for commercial use.
4.This appliance is equipped with an automatic thermal limiter which will cycle off when overheated and come back on when cooled down. If the unit cycles off, unplug the cord for several minutes before restarting.
5.This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
