Renesas H8S/2169 Series, TFP-144

Fasten the user system interface cable head to the IC socket for an TFP-144 package on the user

system with the four screws (M2.0 x 10 mm) provided. Each screw should be tightened a little at a

time, alternating between screws on opposing corners. Take special care, such as manually securing

the IC socket soldered area, to prevent the soldered IC socket from being damaged by

overtightening the screws or twisting the components.

Figure 4 Connecting User System Interface Cable to User System

Contents

Main Cautions Preface Contents Section 1 Configuration Page Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Expansion I/O board WARNING CAUTION Figure 2 Connecting User System Interface Cable to Expansion I/O Board 2.2 Connecting User System Interface Cable to User System WARNING CAUTION Use the guide pins provided to determine where to install the IC socket, as shown in figure 3. CAUTION Page Page Page Page Page Page Section 3 Installing the MCU to the User System CAUTION Page Section 4 Verifying Operation Section 5 Notice