Renesas H8S/2276, H8S/2276R Section 5 Notice

Section 5 Notice

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable

head before inserting the cable head into the user system IC socket.

2. The dimensions of the recommended mount pad for the user system IC socket are different from

those of the MCU.

3. To avoid breaking wires in the cable body, do not place heavy or sharp metal objects on the user

system interface cable.

4. While the emulator station is connected to the user system with the user system interface cable,

force must not be applied to the cable head. Position the emulator station, user system interface

cable, and user system as shown in figure 13.

Figure 13 User System Interface Cable Location Example

5. The P1 jumper is used for testing. Do not remove the inserted jumper pin.