If this isn’t the first time you have used the E10A module with this RSK, please skip to step 36.
First use of the E10A module
32. The ‘Please choose driver’ dialog will be shown. Click <OK>
33. The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated. The
‘Interface’ and ‘Channel’ items will be automatically populated. Click <Close>.
34. The Firmware setup dialog will be shown warning you not to disconnect the USB cable until the firmware
download is complete. Click <OK>.
35. The firmware will be downloaded to the E10A module; this will take a few moments.
Please do not disconnect the E10A from the host during download, doing so is likely to damage the E10A
module.
36. The ‘System Clock’ dialog will be shown, enter ‘8.5’ MHz and click <OK>.
37. The ‘ID code’ dialog box will appear, enter “0000E10A” for the ID code and check the “New ID code” tick-box and click
<OK>. The flash memory write program is then downloaded to the microcontroller
38. Right click on the download module listed in the left hand pane and select ‘Download’.
The code will not yet be downloaded to the microcontroller.
39. Click the <Reset – Go> button.
The code will now be downloaded (this may take several seconds) and will then run. You will see the
LEDs flash on the board.
40. Click the <Stop> button.
The code will stop and the source code will be opened at the current program counter.
After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You c an add projects to the current
workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and dev elopment process using Renesas
Development Tools.
The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device ma nual from the Renesas internet site at:
www.renesas.com/renesas_starter_kits
The version of the compiler provided with this RSK is fully functional but time limited. You have 60 days to evaluate th e full product before the compiler will limit the code
linker to 64k bytes. Full licensed H8 compiler versions are available from your Renesas supplier.