Renesas HA17458 Series Absolute Maximum Ratings , Electrical Characteristics 1 , Electrical Characteristics 2

HA17458 Se ries
Rev.1.00 Jun 15, 2005 page 3 of 8
Absolute Maximum Ratings
(Ta = 25°C)
Ratings
Item Symbol
HA17458 HA17458PS HA17458F HA17458FP Unit
Supply voltage VCC +18 +18 +18 +18 V
V
EE –18 –18 –18 –18 V
Intput voltage VIN*3 ±15 ±15 ±15 ±15 V
Differential input voltage VIN(diff) ±30 ±30 ±30 ±30 V
Power dissipation PT 670*1 670*1 385*2 385*2 mW
Operating temperature Topr –20 to +75 –20 to +75 –20 to +75 –20 to +75 °C
Storage temperature Tstg –55 to +125 –55 to +125 –55 to +125 –55 to +125 °C
Notes: 1. These are the allowable values up to Ta = 45 °C. Derate by 8.3mW/°C above that temperature.
2. These are the allowable values up to Ta = 31 °C mounting on 30% wiring density glass epoxy board. Derate
by 7.14mW/°C above that temperature.
3. If the supply voltage is less than ±15V, input voltage should be less than supply voltage.
Electrical Characteristics 1
(VCC = –VEE = 15V, Ta = 25°C)
Item Symbol Min Typ Max Unit Test conditions
Input offset voltage VIO — 2.0 6.0 mV RS ≤ 10kΩ
Input offset current IIO — 6 200 nA
Input bias current IIB — 30 500 nA
Line regulation ∆VIO/∆VCC — 30 150 µV/V RS ≤ 10kΩ
∆VIO/∆VEE — 30 150 µV/V RS ≤ 10kΩ
Voltage gain AVD 86 100 — dB RL ≥ 2kΩ, Vout = ±10V
Common mode rejection ratio CMR 70 90 — dB RS ≤ 10kΩ
Common mode input voltage range VCM ±12 ±13 — V
Peak-to-peak output voltage Vop-p ±12 ±14 — V RL = 10kΩ
Power dissipation Pd — 90 200 mW No load, 2 channel
Slew rate SR — 0.6 — V/µs AVD = 1
Input resistance Rin 0.3 1.0 — MΩ
Input capacitan ce Cin — 6.0 — pF
Output resistance Rout — 75 — Ω
Electrical Characteristics 2
(VCC = –VEE = 15V, Ta = –20 to +75°C)
Item Symbol Min Typ Max Unit Test conditions
Input offset voltage VIO — — 9.0 mV RS ≤ 10kΩ
Input offset current IIO — — 400 nA
Input bias current IIB — — 1100 nA
Voltage gain AVD 80 — — dB RL ≥ 2kΩ, Vout = ±10V
Peak-to-peak output voltage Vop-p ±10 ±13 — V RL = 2kΩ