HD74LV1GWU04A
Rev.2.00, May 19, 2006 page 2 of 5
Pin Arrangement
(Top view)
V
C
C
2 5
GND
61Y
1
1A
3
2A 42Y
Absolute Maximum Ratings
Item Symbol Ratings Unit Test Conditions
Supply voltage range VCC –0.5 to 7.0 V
Input voltage range *1 V
I –0.5 to 7.0 V
Output voltage range *1, 2 V
O –0.5 to VCC + 0.5 V Output : H or L
Input clamp current IIK –20 mA VI < 0
Output clamp current IOK ±50 mA VO < 0 or VO > VCC
Continuous output current IO ±25 mA VO = 0 to VCC
Continuous current through
VCC or GND ICC or IGND ±50 mA
Maximum power dissipation
at Ta = 25°C (in still air) *3 PT 200 mW
Storage temperature Tstg –65 to 150 °C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item Symbol Min Max Unit Conditions
Supply voltage range VCC 1.65 5.5 V
Input voltage range VI 0 5.5 V
Output voltage range VO 0 VCC V
— 1 VCC = 1.65 to 1.95 V
— 2 VCC = 2.3 to 2.7 V
— 6 VCC = 3.0 to 3.6 V
IOL
— 12 VCC = 4.5 to 5.5 V
— –1 VCC = 1.65 to 1.95 V
— –2 VCC = 2.3 to 2.7 V
— –6 VCC = 3.0 to 3.6 V
Output current
IOH
— –12
mA
VCC = 4.5 to 5.5 V
Operating free-air temperature Ta –40 85 °C
Note: Unused or floating inputs must be held high or low.