Renesas M306V8T-EPB - page 35

M306V8T-EPB User’s Manual 2. Setup

REJ10J0777-0100 Rev.1.00 2005.08.01 Page 35 of 90

Table 2.3 Switch settings of the M306V8T-EPB (JP2, JP3, SW1 to SW5) (2/2)

Switch Switch name Setting Description

●TRGT EPB

SW3

P103/CAP

(Factory-setting)

Connects pin P103/CAP of the evaluation MCU to the user system.

SW3 P103/CAP

SW3

P103/CAP

●TRGT EPB

Connects pin P103/CAP of the evaluation MCU to the internal

circuit of the M306V8T-EPB.

●EPB TRGT

SW4

CVIN1

(Factory-setting)

Connects pin CVIN1 of the evaluation MCU to the internal circuit

of the M306V8T-EPB. When the user system is not connected, use

this setting.

SW4 CVIN1

●EPB TRGT

SW4

CVIN1

Connects pin CVIN1 of the evaluation MCU to the user system.

●EPB TRGT

SW5

CVIN2

(Factory-setting)

Connects pin CVIN2 of the evaluation MCU to the internal circuit

of the M306V8T-EPB. When the user system is not connected, use

this setting.

SW5 CVIN2

●EPB TRGT

SW5

CVIN2

Connects pin CVIN2 of the evaluation MCU to the user system.

IMPORTANT

Notes on Switch Settings:

 Be sure to turn of the power before setting the switches or connecting the cables. Otherwise, the internal circuits

may be damaged.

 Use the SWI and SW2 only in the combination of the setting described in Table 2.1.

Contents

Main M306V8T-EPB Users Manual 7. 8. Preface Important Page Precautions for Safety CAUTION Definitions of Signal Words IMPORTANT WARNING Page Contents Page User Registration Terminology 1. Outline 1.1 Package Components 1.2 Other Tool Products Required for Development 1.3 System Configuration Page Page 1.4 Specifications 1.5 Operating Environment 2. Setup 2.1 Flowchart of Starting Up the Emulator 2.2 Installing the Emulator Debugger (Renesas Debugger Package for M16C) 2.3 Connecting the Host Machine 2.4 Connecting the PC7501 2.5 Connecting the Power Supply for the Emulator 2.6 Turning ON the Power Page 2.7 Downloading Firmware M306V8T-EPB Users Manual 2. Setup 2.8 Self-check Figure 2.6 LED displays in the self-check Page 2.9 Connecting the User System M306V8T-EPB Page 2.10 Switch Settings (1) (2) M306V8T-EPB Users Manual 2. Setup Figure 2.10 Circuits for JP2, JP3, SW1 to SW5, and OSD IC3 1 2 3 1 2 3 1 2 3 1 2 3 Page Page Page 2.11 Selecting Clock Supply Page Page Page Page 3. Usage (How to Use the Emulator Debugger) 3.1 Starting Up the Emulator Debugger Page Page Page Page Page Page Page Page 3.2 Editor (Source) Window Page Page 3.3 Hardware Breakpoint Setting Window Page Page Page Page 3.4 Trace Window Page Page 3.5 RAM Monitor Window 4. Hardware Specifications 4.1 Target MCU Specifications 4.2 Access Timing () M306V8T-EPB Users Manual 4. Hardware Specifications Write timing Figure 4.1 Memory expansion mode and microprocessor mode (3-wait, accessing external area) Read timing () M306V8T-EPB Users Manual 4. Hardware Specifications Write timing Read timing Page 4.3 Differences between the Actual MCU and Emulator Page Page M306V8T-EPB Users Manual 4. Hardware Specifications 4.4 Connection Diagrams Figure 4.4 Connection diagram Page 4.5 External Dimensions Page 4.6 Notes on Using This Product Page Page Page Page 5. Troubleshooting 5.1 Flowchart to Remedy the Troubles 5.2 When the Emulator Debugger Does Not Start Up Properly Page Page 5.3 How to Request for Support 6. Maintenance and Guarantee 6.1 User Registration 6.2 Maintenance 6.3 Guarantee 6.4 Repair Provisions 6.5 How to Make Request for Repair