( 5 / 5 )
CAUTION

Cautions to Be Taken for Emulator:

•For debugging, use this product in the combination with the M32100T2-SDI-E,
M32170T-SDI, M32100T-SDI-E or M32100T3-SDI-E emulator.
•When starting up an emulator debugger (M3T-PD32R or M3T-PD32RM), select an
MCU file according to the type name and the operation mode of the MCU to be
debugged. For details on the MCU file to be selected, refer to the emulator
debugger's release notes.
•Connect the both cables for connecting the emulator, the SDI MCU control interface
cable (10-pin) and the SDI trace interface cable (20-pin).
•For the precautions for the combination of the emulator, refer to the user's manual
of the emulator debugger.

8. Precautions

Cautions to Be Taken for This Product:

•When connecting the YQPACK144SD, be sure to use the included YQ-GUIDE's.
•We cannot accept any request for repair.
•For purchasing the NQPACK144SD, YQPACK144SD and HQPACK144SD, contact
the following:
Daimaru Kogyo Ltd.
http://www.daimaru-kogyo.com/
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_tet.htm
•For inquiries about the product or the contents of this manual, contact your local
distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools

Cautions for Differences between MCU and This Product:

•For debugging, as the M32176F4VWG (512KB internal flash ROM) on the
M32176T-PTC is used, be careful about the difference of the internal flash ROM
size.
•When setting the clock select switch to the "SOCKET" side, oscillation occurs by
itself, be careful about the difference of the resister value and the capacitor.
•The capacity load of the all lines of the MCU will increase depending on wirings and
connectors. Use the part whose timing is critical after checking it works properly.