(4/6)
5.2 For M32100T2-SDI-E, M32100T3-SDI-E or
M32100T5-SDI-E.
(1) Mount the NQPACK144SD on the user system
(2) Connect the YQPACK144SD on the NQPACK144SD.
(3) Secure the four corners of the YQPACK144SD with the
YQ-GUIDE’s.
(4) Mount the M32186T2-PTC on the YQPACK144SD.
(5) Set the clock select switch.
(6) Connect the emulator probe to the M32186T2-PTC.
.
Emulator main unit or
Emulator Probe
M32186T2-PTC
YQPACK144SD
YQ-GUIDE(x4)
NQPACK144SD
144-pin 0.5mm pitch
-(144P6Q-A) foot pattern
(1)
(2)
(3)
(4)
(5)
(6)
●: No.1 pin
Be sure to match the position of No.1 pin of foot pattern and each part
Connection to M32100T2-SDI-E,
M32100T3-SDI-E or M32100T5-SDI-E
Clock select switch
Figure 5.2 Connection Procedure (2)
5.3 On-board Evaluation
(1) Mount the NQPACK144SD on the user system
(2) Mount the M32186FxxFP on the NQPACK144SD.
(3) Mount the HQPACK144SD on the NQPACK144SD.
HQPACK144SD
(separately available)
NQPACK144SD
144-pin 0.5mm pitch
(144P6Q-A) foot pattern
(1)
(2)
(3)
● : No. 1 pin
Be sure to match the position o f N o . 1 pin of the foot pattern and each part.
M32186FxxFP
(separately available)
Figure 5.3 Connection Procedure (3)