( 29 / 34 )
5.10 External Trigger(1) External trigger signal input timing
The latch timing of the external trigger signal is shown in Figure 5.3.
Figure 5.3 Latch timing of external trigger signal
(2) External trigger signal input characteristics
Trigger breaks work according to the condition (leading edge/trailing edge) of signals input from
the external trace cable. The external trigger signals of the trace points and the external trigger
signals of the break points use the same signals.
The input characteristics of the external trigger signals are shown in Table 5.2 below. See the table
before using external trigger signals.
Table 5.2 External trigger signal input characteristics
Item
H-level input voltage
L-level input voltage
VIH
VIL
VCC=2.0V
VCC=4.5V
VCC=4.5V
VCC=2.0V
-
-
-
-
Symbol Voltage Maximum Minimum
0.5V
1.35V
1.5V
3.15V
Instruction Next instruction
System clock
XIN
External trigger clock
TRIG