1. Things to Check When Unpacking The M38C29T-ADF package consists of the following products. When unpacking your package, check to see that all of these
components are included.
If you find any item missing or faulty, or any suggestion, contact your local distributor.
Table 1.1 Package components
Item
M38C29T-ADF temporary target board
M38C29T-ADF User’s Manual (this manual)
The M38C29T-ADF is a temporary target board used to develop software with a compact emulator M38000T2-CPE or PC4701
emulator system. It supplies to the M38C29RLFS MCU the minimum required signals needed to operate the emulator MCU,
including power supply voltage, clock signals and reset signals. Use it when the user system is not ready.
Table 3.1 lists the specifications of the M38C29T-ADF.
Table 3.1 Specifications
Applicable MCU M38C29RLFS
Clock 4.0MHz oscillator mounted (oscillator circuit board OSC-2 used)
32.768kHz (can be disconnected by SW1)
Vcc Supplied separately*
Vss Supplied separately
RESET - Reset circuit mounted (power-on reset and reset switch)
- Connects the reset output of an emulation pod
Width 90mm External dimensions Depth 115mm
Others Universal part prepared
* Power cannot be supplied from the emulator (e.g. M38000T2-CPE). A separate power supply is needed.
(2/8)