(3/4)
5. Connection Procedure

(See Figure 3)

The procedure for connecting the M3T-F160-100NSD is shown
below.
(1) Mount the NQPACK100SD-ND on the user system.
(2) Attach the YQPACK100SD on the NQPACK100SD-ND.
(3) Secure the four corners of the YQPACK100SD with the
YQ-GUIDE's.
● Do not use the screws included with the
YQPACK100SD for fixing the YQPACK100SD.
● Do NOT used the screwdriver included with the
NQPACK100SD-ND that is used only for the
HQPACK100SD.
(4) Attach the probe of the emulation pod to the M3T-
F160-100NSD.
(5) Connect M3T-F160-100NSD on the YQPACK100SD.
M3T-F160-100NSD
YQPACK100SD
NQPACK100SD-ND
100-pin 0.5-mm-pitch
(100P6Q-A) foot pattern
(1)
(2)
(3)
(5)
(4)
Use a slotted screwdriver.
YQ-GUIDE (x4)
: No. 1 pin
Be sure to align the pins.
FLX160-PRB
or
M3xxxxTx-EPB
Figure 3 Connection procedure of the M3T-F160-100NSD

6. External Dimensions and a Sample Foot Pattern

55.0 21.8
40.0
5.3
0.25
0.5
13.0
17.0
13.0
17.0
Unit:mm
16.5
40a
40b
1a
1b
CN2
M3T-F160-100NSD REV.A
50 26
25
1
51
75
76 100
CN1 MADE IN JAPAN
40a
40b
1a
1b
CN1
CN2
Figure 4 External dimensions and a sample foot pattern of the M3T-F160-100NSD