( 3 / 4 )
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-F160-128NRD is
shown below.
(1) Mount the NQPACK128RD on the target system.
(2) Attach the YQPACK128RD on the NQPACK128RD.
(3) Secure the four corners of the YQPACK128RD with the
YQ-GUIDE's.
•Do NOT use the screws included with the
YQPACK128RD.
•Do NOT use the screwdriver included with the
NQPACK128RD that is used only for the
HQPACK128RD.
(4) Attach the probe of the emulation pod to the M3T-F160-
128NRD.
(5) Attach the M3T-F160-128NRD on the YQPACK128RD.
Figure 3 Connection procedure
6. External Dimensions and a Sample Foot Pattern
Figure 4 External dimensions and a sample foot pattern
Unit: mm
M3T-F160-128NRD
YQ-GUIDE's (x4)
YQPACK128RD
NQPACK128RD
128-pin 0.5-mm-pitch
(128P6Q-A) foot pattern
FLX160-PRB
or
M3xxxxTx-EPB
Use a slotted screwdriver.
: Position of No. 1 pin
Be sure to align the pins.