Renesas M3T-FLX-144NSE 1. Outline , 2. Package Components (See Figure 1) , 3. Specifications , 4. Usage (See Figure 2)

(2/4)

1. Outline

The M3T-FLX-144NSE is a converter board for connecting the

160-core flexible cable FLX160 to a foot pattern for 144-pin

0.4-mm-pitch TQFP (144PFB-A).

2. Package Components (See Figure 1)

(1) M3T-FLX-144NSE converter board

(2) YQPACK144SE (made by Tokyo Eletech Corporation)

(3) NQPACK144SE (made by Tokyo Eletech Corporation)

(4) YQ-GUIDE (4 pieces) (made by Tokyo Eletech

Corporation)

(5) M3T-FLX-144NSE User's Manual (This manual)

3. Specifications

Table 1 Specifications

Applicable package 144PFB-A

(144-pin 0.4-mm-pitch TQFP)

Insertion/removal

iterations of connector 50 times guaranteed

4. Usage (See Figure 2)

The M3T-FLX-144NSE can be used for debugging and board

mounted evaluation in common by mounting the

NQPACK144SE on the target system.

(1) For debugging

Mount the NQPACK144SE and YQPACK144SE on the

foot pattern of the target system in that order. And connect

the probe of the emulation pod to the upper connector of

the M3T-FLX-144NSE. Then connect the

YQPACK144SE and the M3T-FLX-144NSE.

(2) For onboard evaluation

Mount an MCU with on-chip flash memory or one-time

PROM and the HQPACK144SE (separately available) in

that order on the NQPACK144SE on the target system.

Before using the M3T-FLX-144NSE, be sure to read "7.

Precautions" on page 4.

Figure 1 Package components of the M3T-FLX-144NSE

Figure 2 Usage of the M3T-FLX-144NSE

Probe of emulation pod

(1) Debugging

M3T-FLX-144NSE

YQ-GUIDE (x4)

YQPACK144SE

NQPACK144SE

144-pin 0.4-mm-pitch

(144PFB-A) foot pattern

(2) Onboard evaluation

HQPACK144SE

(separately available)

MCU with on-chip flash

memory or one-time PROM

: No. 1 pin

Be sure to align the pins.