Renesas M61323SP/FP Note How to Use This IC (M61323SP)

M61323SP/FP
REJ03F0201-0201 Rev.2.01 Mar 31, 2008
Page 17 of 19
Note How to Use This IC (M61323SP)
1. R, G, B input signal is 0.7 VP-P of standard video signal.
2. H, V input is 5.0 V TTL type.
3. Input signal with sufficient low impedance to input terminal.
4. The terminal of R, G, B output pin are shown as figure 1.
When resistance is connected between the pin 31 (28, 25) and GND, ICC will be increase.
5. Switch (pin 13) can be changed by supplying some voltage as figure 2.
0 to 0.5 V: INPUT1
2.5 to 5 V: INPUT2
Do not apply VCC or more DC voltage.
6. Power save mode is provided for saving ICC less than about 10 mA as figure 3.
0 to 0.5 V: Power save mode (H.V-SW, Sync-Sep., G-Buffer)
2.5 to 5 V: Normal mode
Do not apply 5 V or more DC voltage
7. When not use the Sync-separation circuit built in this IC, capacitance of several tens of pF is required between the
pin 22 and GND.
R
I < 5 mA
5 V
50 Ω
600 Ω
Figure 1
13
Figure 2
11
Figure 3