Revolabs Fusion™ Wireless Microphone System- Tandberg 6000 / 8000 MXP Setup Guide
NOTES AND CAUTIONS:
This setup guide will guide you through the steps needed to properly connect a Revolabs Fusion System to a Tandberg 6000 / 8000 MXP video codec.
1.Connecting the Cables
2.Configuring the 6000 / 8000 MXP Video Codec
Note: It is important to carefully follow these instructions in order and completely. Otherwise your Fusion System and/or the video codec may not function properly. Please read through these instructions completely before proceeding. Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1.Revolabs Fusion 4 or 8 microphone system
2.Tandberg 6000 / 8000 MXP video codec
3.QTY 1 XLR male to XLR male cable
4.Qty 2
5.Amplified speakers
NOTE: IMAGES OF SET UP SCREENS ARE DEFAULT SETTINGS FROM TANDBERG AND ARE PART OF THE TANDBERG MXP ADMINISTRATOR’S GUIDE © MAY 2008
