Revolabs HDX 9004 setup guide Connecting the Cables

Connecting the Cables

CONNECTING A REVOLABS FUSIO N MICROPHONE SYSTEM TO POLYCOM HDX 9004 VIDEO CODEC

1.Connect a Male RCA-RCA audio cable between the “CONF OUT ” port on the

Fusion and the red “AUDIO INPUT 1” port on the HDX 9004.

2.Connect a Male RCA-RCA audio cable between the “CONF IN” port on the Fusion and the red “AUDIO OUTPUT 1” port on the HDX 9004.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Speakers.

Note: The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancellation.