AdvantagePlus Sealed-Combustion Gas-Fired Commercial Water Heaters

Available in Sizes Ranging From 45 - 119 Gallon Models

100,000 BTU/Hr. thru 199,000 BTU/Hr.

Rheem-Ruud AdvantagePlusTM Gas Commercial Water Heaters are specifically designed to provide customers with maximum savings on operation, space and installation. Designed with the most advanced technology available, these products optimize efficiency and operating reliability.

Construction Features:

No Chimney Required

Vents Up To 40 Feet Using 3" Schedule 40 PVC, CPVC or ABS Pipe

100,000 BTU and

130,000 BTU Models

Are Certified To

Vent With 2"

Schedule 40 PVC, CPVC or ABS Pipe

®

•316L stainless steel tank construction (requires no anode rods).

•No chimney required; direct vent using plastic pipe.

•Thermal efficiency of 95% dramatically reduces operating costs.

•85 equivalent feet of vent length.

•Low NOx emissions. Meets SCAQMD Rule 1146.2.

•High impact plastic jacket eliminates dents.

•2” of non-CFC, polyurethane foam insulation.

•Less than 1/2 degree per hour heat loss (R17).

•Corrosion resistant, high efficiency 90/10 cupronickel heat exchanger.

•Self-diagnostic electronic control with digital readout for water temperature, set point and differential.

•Removable front cover allows easy access to equipment (24" service clearance recommended).

•Temperature range from 70°F to 160°F (maximum temperature setting of 180°F available on HE45-160 and HE45-199 booster models only).

•Zero clearance to all combustible surfaces.

•Factory installed AGA/ASME rated T&P relief valve.

•Booster installation kit provided with HE45-160 and HE45-199 booster models.

Heat Exchanger/

Combustion Chamber

Control Well and E.C.O.

Air Inlet Connector

Gas Valve

Combustion Blower

Gas Burner

Gas Inlet Nipple 1/2”

Hot Surface Ignitor

Flame Probe

Exhaust Outlet Connector

Control Board

Vent Over-Temp

Reset Switch

Exhaust Elbow and Drain

Pressure Switch

Transformer

Condensate Connector

Hose

Condensate Connector

Certifications and Ratings:

The water heaters are UL/ULC listed and meet or exceed thermal efficiency and standby loss requirements of current ASHRAE standards. All water heaters are supplied with an AGA/ASME rated temperature and pressure relief valve. The control panel is an integrated solid state temperature and igni- tion control device with integral diagnostics, LED fault display capability and a digital display of temperature settings. All models are North Carolina Code compliant. Meet all safety and construction requirements of ANSI Z21.10.3.

CERTIFIED FOR A 150 PSI MAXIMUM WORKING PRESSURE.

Continued next page.

Page 1 Page 2
Page 1
Image 1
Rheem 000 BTU manual Available in Sizes Ranging From 45 119 Gallon Models, Construction Features No Chimney Required
Page 1 Page 2

000 BTU specifications

The Rheem 000 BTU is a high-performance water heater that has gained popularity for its efficiency and reliability. Designed for residential and commercial applications, this innovative appliance provides an impressive heating capacity while ensuring energy savings. Its sleek design and advanced technology make it a top choice for homeowners and businesses alike.

One of the most notable features of the Rheem 000 BTU is its tankless water heating capability. Unlike traditional water heaters with storage tanks, the tankless design heats water on demand. This means there’s no need to wait for a tank to refill, and users can enjoy a continuous supply of hot water. This feature not only enhances convenience but also minimizes energy consumption since the heater operates only when hot water is needed.

The Rheem 000 BTU incorporates cutting-edge technology, including a user-friendly digital display that allows homeowners to easily monitor and adjust settings. This intuitive interface provides users with real-time information regarding water temperature, unit status, and energy usage. Furthermore, the unit is equipped with built-in Wi-Fi connectivity, enabling remote control and monitoring via a smartphone app. This smart technology empowers users to manage their water heating needs even when they are away from home.

Another key characteristic of the Rheem 000 BTU is its impressive energy efficiency. Thanks to its advanced insulation and heating elements, this water heater boasts a high Energy Factor (EF) rating, ensuring lower utility bills. Additionally, the unit is designed to meet or exceed strict energy efficiency regulations, making it an environmentally friendly choice for consumers looking to reduce their carbon footprint.

Safety is paramount in the design of the Rheem 000 BTU. The unit features multiple safety mechanisms, such as a built-in temperature limiter to prevent overheating and a pressure relief valve to safeguard against excessive pressure buildup. This ensures that users can enjoy hot water without worrying about potential hazards.

In summary, the Rheem 000 BTU water heater stands out due to its tankless design, advanced technology, outstanding energy efficiency, and safety features. Whether for a home or a commercial space, this unit provides reliable and efficient water heating, making it a worthwhile investment for anyone looking to upgrade their water heating system.
Top Page Image Contents