Indirect Water Heaters
Available in 30, 38, 45, 75 and 110 Gallon Models
Construction Features:
•Built to last –
tank is manufactured from heavy gauge steel. Longer life equals a higher “return on investment”.
Outer jacket is made from steel and powder coated for a lasting, durable finish.
•High temperature porcelain enamel protects all tank and coil –
and maximizes corrosion resistance.
•Factory installed automatic temperature controls – immersion aquastat on all models.
•Factory installed brass drain valve
•Sediment reduction inlet – standard on the STID80 and STID120. Reduces sediment buildup on the tank bottom – increasing operating efficiencies and tank life.
•Temperature and pressure relief valve – CSA/ASME rated and factory installed.
•1-1/2" Coil diameter –
larger diameter, results in higher recovery and less pressure drop through the coil – smooth surface on the coil resists lime
•2"
•Two heavy-duty magnesium anode rods –
inhibit corrosion and maximize tank life.
•Factory installed dielectric nipples – provide greater insulating protection against electrolysis.
Tested in accordance with GAMA
Continued on reverse.