®
AdvantagePlus Sealed-Combustion Gas-Fired Commercial Water Heaters
Available in Sizes Ranging From 45 - 119 Gallon Models
100,000 BTU/Hr. thru 199,000 BTU/Hr.
Construction Features:
No Chimney Required
Vents Up To 40 Feet Using 3" Schedule 40 PVC, CPVC or ABS Pipe
100,000 BTU and
130,000 BTU Models
Are Certified To
Vent With 2"
Schedule 40 PVC, CPVC or ABS Pipe
®
•316L stainless steel tank construction (requires no anode rods).
•No chimney required; direct vent using plastic pipe.
•Thermal efficiency of 95% dramatically reduces operating costs.
•85 equivalent feet of vent length.
•Low NOx emissions. Meets SCAQMD Rule 1146.2.
•High impact plastic jacket eliminates dents.
•2” of
•Less than 1/2 degree per hour heat loss (R17).
•Corrosion resistant, high efficiency 90/10 cupronickel heat exchanger.
•
•Removable front cover allows easy access to equipment (24" service clearance recommended).
•Temperature range from 70°F to 160°F (maximum temperature setting of 180°F available on
•Zero clearance to all combustible surfaces.
•Factory installed AGA/ASME rated T&P relief valve.
•Booster installation kit provided with
Heat Exchanger /
Combustion Chamber
Control Well and E.C.O.
Air Inlet Connector
Gas Valve
Combustion Blower
Gas Burner
Gas Inlet Nipple 1/2”
Hot Surface Ignitor
Flame Probe
Exhaust Outlet Connector
Control Board
Vent
Reset Switch
Exhaust Elbow and Drain
Pressure Switch
Transformer
Condensate Connector
Hose
Condensate Connector
Certifications and Ratings:
The water heaters are UL/ULC listed and exceed the minimum efficiency requirements of ASHRAE/IES
CERTIFIED FOR A 150 PSI MAXIMUM WORKING PRESSURE.
Continued next page.