Installing the Printer Driver Using IEEE 1394 (SCSI print) |
|
| |
F Follow the |
| ||
If the printer driver has already been installed, the printer icon is added to the |
| ||
[Printers and Faxes] window. In this case, printer driver installation is not nec- |
| ||
essary. |
| ||
1 | |||
Even if the printer driver is already installed, the message “Found New Hard- | |||
| |||
ware Wizard” may appear when the machine is connected to the computer using the IEEE 1394 interface cable for the first time. In that case, install the printer driver.
Note
❒This machine can receive print data from one computer at a time only. If a print job from a computer collides with other data, a message may appear on the computer.
❒To install another printer driver after setting the “1394_00n” port, click [1394_00] as a port during the printer driver installation.
❒When the printer driver is properly installed, connecting or disconnecting the optional IEEE 1394 cable causes the printer icon to change.
❒If printing does not work properly after the installation, delete the port and reinstall the printer driver. For details, see Trouble Shooting.
❒If you do not want to install the printer when Found New Hardware Wiz- ard starts under an operating system that supports SCSI print, disable the device by following the procedure below:
A When the [Found New Hardware Wizard] dialog box appears, check that
[This wizard helps you install software for: Unknown] is displayed, select the [Install from a list on specific location (Advanced)] check box, and then click [Next >].
B When the message “Please choose your search and installation option.” appears, clear all check boxes from [Search for the best driver in these loca- tions.], and then click [Next >].
C When the message “The wizard could not find the software on your computer for..” appears, click [OK].
D When the message “Cannot Install this Hardware” appears, select the
[Don't prompt again to install the software] check box, and then click [Finish].
45