Ricoh 16599 Using the Lens Shutter of the LS Lens

Using the Lens Shutter of the LS Lens

The PENTAX 645LS lenses have a built-in leaf shutter which allows for high speed flash synchronization.

When using a leaf shutter lens, set the shutter speed ring on the lens to LS.

Note that the following restrictions apply when using a leaf shutter lens.

•The shutter of the lens cannot be used during Live View.

•The camera operates in Lmode regardless of the exposure mode setting on the camera.

•The difference from the proper exposure is not displayed.

•[LS] is displayed for the shutter speed.

•The proper exposure is not obtained even when Mis pressed.

•EV Compensation is not available.

•Setting the shutter speed ring to LS when EV Compensation is set cancels EV Compensation.

•AE Lock is not available.

•Setting the shutter speed ring to LS when AE Lock is set cancels AE Lock.

•Continuous Shooting, Self-timer (2 sec.), Remote Control (3 sec. delay), and Remote Continuous Shooting of the drive modes are not available.

•Setting the shutter speed ring to LS when Self-timer (2 sec.) is set switches the shooting mode to Self-timer (12 sec.).

•Setting the shutter speed ring to LS when Remote Control (3 sec. delay) or Remote Continuous Shooting is set switches the shooting mode to Remote Control (immediate release).

•Mirror Lock-Up Shooting is not available.

•Setting the shutter speed ring to LS when the mirror is raised lowers the mirror.

•Optical Preview is not available.

•If the shutter of the lens is charged in advance, Digital Preview can be used. (The same applies when using the Digital Preview to preview the image with White Balance or Custom Image.)

•Interval Shooting, Exposure Bracketing, and HDR Capture are not available.

•Setting the shutter speed ring to LS when Exposure Bracketing or HDR Capture is set cancels the setting.

•Setting the shutter speed ring to LS when Interval Shooting is set exits Interval Shooting.

•In Multi-exposure mode, the shutter of the lens must be charged manually for each shot.

•An external flash cannot be used even when connected to the hot shoe. Be sure to use the sync terminal on the lens.

•An external flash cannot be synchronized even when connected to the sync socket on the camera.

•The flash mode setting is not applied to LS shooting.

2

Started Getting

29

Contents

Operating Manual Page ABOUT THE CAMERA About the Battery Charger and AC Adapter About the Battery Keep the Camera and its Accessories out of the Reach of Small Children Before Using Your Camera About the Battery and Charger Precautions on Carrying and Using Your Camera About SD Memory Cards Cleaning Your Camera Storing Your Camera About Eye-FiCards Provided Manuals Operating Manual Contents 4 Playback and Processing Functions 5 Using a Computer 6 Appendix Regarding User Registration 1 Before Using Your Camera Checking the Contents of the Package Names and Functions of Working Parts Display Indicators Checking the Contents of the Package Names and Functions of Working Parts Operating Controls Page Button and Dial Operations Adjusting the Angle of the Monitor 2 Slowly lower until it stops 3 Hold the bottom of the monitor and lift upward 4 Adjust the angle Display Indicators Capture Mode Status Screen Control panel Shooting Info Display Playback Mode Detailed Information Display Histogram Display/RGB Histogram Display 1Viewfinder LCD Panel Electronic Level Page 2 Getting Started Attaching the Strap Attaching a Lens Using the Battery and Charger Inserting a Memory Card Attaching the Strap Attaching a Lens Page Lens Compatibility Chart Using the Lens Shutter of the LS Lens Using the Battery and Charger the camera, and insert the battery until it locks into place 3 Close the battery cover Using the AC Adapter 1 Make sure that the camera is turned off, and open the terminal cover Inserting a Memory Card Power Initial Settings Use CDto select Tor Sand press E Date Adjustment On the [Date Adjustment] screen, press Dand use ABto select the date format Formatting a Memory Card 1 Press F 2 Turn Qor Rto display D4 menu 3 Use ABto select [Format] and press D 4 Use ABto select the memory card slot to format and press D Diopter Adjustment Testing Your Camera Shooting with Live View How to Change Function Settings Using the Direct Keys WXYZ Using the Control Panel 1 Press Gin standby mode Press Bin standby mode Use ABCDto select the item you want to change the setting for Using the Menus 4 Use ABto select an item and press E 1 Press Fin standby mode 2 Press Dor turn Rto the right 3 Use ABto select an item and press D 3 Shooting Functions Focusing Exposure Setting Movie Recording White Balance Focusing Setting the AF Mode when Shooting with the Viewfinder Selecting the Focusing Area (AF Point) Setting the AF Mode during Live View Exposure Setting Changing the Exposure Mode 1 Turn the mode dial while pressing the mode dial lock button 2 Use Qor Rto change settings EV Compensation Movie Recording Using an External Microphone Playing Back Movies 1 Display the movie to play back in single image display of the playback mode White Balance Saving the White Balance Settings of a Captured Image Color Temperature Select pin Step 2 on p.53, and press B Select from p1 to p3 Press G Adjust the color Drive Mode Select Oor Pand press E Self-timer 2 Select Oand press B 4 Press the shutter release button halfway, then fully Remote Control 1 Press Ain standby mode Multi-exposureW 7 Press the shutter release button to start shooting 2 Select Vand press B 5 Specify [Number of Shots] 6 Press E Interval Shooting 2 Select Yand press B 3 Set the shooting conditions 4 Press Eto finish setting 5 Press the shutter release button to start shooting Interval Composite 2 Select 3and press B Interval Movie Record 1 Turn the Stills/Movie switching dial to Cand press A Exposure Bracketing 1 Turn Qwhile pressing to set the number of shots 2 Turn Rwhile pressing 5to set the bracket value 3 Press the shutter release button fully Mirror Lock-upShooting 1 Turn the Mirror Up dial 2 Press the shutter release button fully 3 Press the shutter release button fully again Shake Reduction Flash Mode Using a Sync Cord Setting the Flash Mode 1 Press Bin standby mode Select a flash mode To compensate the flash output, press Band then Flash Compatibility Chart Preview Custom Image 4 Set the parameters Saving the Settings of a Captured Image 1 Press Bin single image display of playback mode 2 Select a(Save Cross Processing) and press E 3 Use Qto select a cross Page 4 Playback and Processing Functions Setting the Playback Functions Displaying a Single Image Changing the Playback Method Setting the Playback Functions Displaying a Single Image Changing the Playback Method Select & Delete Deleting a Folder Select the desired rotation direction and press E Image Rotation Display the image to edit in single image display Select Sin the playback mode palette Slideshow 1 Select Zin the playback mode palette Editing and Processing Images Resize Cropping Digital Filter Recreating Filter Effects 6 Use Qto select an image for applying the same filter effects Movie Edit 7 Press E 8 Select [Save to SD1] or [Save to SD2] and press E 3 Select the point where you want to divide the movie 4 Press L RAW Development 1 Select bin the playback mode palette 2 Select the desired option and press E 3 Select the image(s) or a folder Select the parameter setting Protecting Images Connecting the Camera to an AV Device 5 Using a Computer Connecting to a Computer Using the Provided Software Connecting to a Computer 5Windows Macintosh Connecting the Camera to a Computer 1 Turn the computer on 2 Turn the camera off 4 Connect the USB cable to the USB port of the computer 5 Turn the camera on Using the Provided Software For Windows For Mac OS Digital Camera Utility 5 Screen Viewing the Help Menu Page 6 Appendix Optional Accessories Optional Accessories Power Supply Accessories Flash Accessories Interchangeable Focusing Screen Cable Switch CS-205 For Viewfinder Remote Control GPS Unit O-GPS1 Strap Other Accessories Error Messages Troubleshooting Page Index Symbols Numerics Page Page Page Page WARRANTY POLICY