Basics
20
1
Envelopes
Note
❒When copying on envelopes, use the bypass tray and specify the size. See ⇒
P.43 “When Copying onto Envelopes”
❒Specification of envelopes are as follows:
❒You can load up to 10 envelopes (72 - 90 g/m2, 19 - 24 lb) onto the bypass tray
at a time, without forcibly preassign them. However, make sure that the en-
velopes are not damp, and that the top of the stack is not higher than the limit
mark on the side guide ⇒ P.43 “When Copying onto Envelopes”
❒Load the envelopes with the flaps aligned to the right side fence. The flaps
should be securely folded down.
❒Make sure that there is no air in the envelopes before setting.
❒To get the better copy quality, it is recommended that you set the right, left,
top, and bottom margin, to at least 15 mm (0.6") each.
❒Do not copy on both sides of envelopes.
❒Load only one size and type of envelope at a time.
❒Before loading envelopes, flatten the leading edges (side being fed into the
printer) of them by running a pencil or ruler across them.
Metric version Inch version
Weight 72 – 90 g/m219 – 24 lb
Recommended weight and
size 72 g/m2, 114 × 162 mm (C6
Env) 24 lb, 37/8" × 71/2" (Mon-
arch)