Replacing Parts
7
1
Important
❒Be sure to move the printer hor-
izontally. Moving the printer
facing up on down may cause
the toner to scatter.
❒Do not put the printer on an un-
stable or tilted surface.
Note
❒If the printer is equipped with
the optional Paper Feed Unit,
do not move the printer and the
unit together, they are not se-
curely attached.
CCC
CSlide the green lock lever to the
right (A
AA
A), remove the paper feed
roller (B
BB
B).
The illustration shows an example
of the paper feed roller as installed
in the printer.
DDD
DWhile sliding the green lock lever
to the right (A
AA
A), set the new roller
(B
BB
B). After that, return the green
lock lever to its original position
(C
CC
C).
Note
❒Confirm that the green lock le-
ver secures the roller correctly
by checking if the new roller ro-
tates smoothly.
EEE
EIf the printer is equipped with the
optional Paper Feed Unit(s), fol-
low the same procedure when re-
placing the paper feed roller.
If you installed two Paper Feed
Units, also replace both paper feed
rollers.
FFF
FPlace paper in the paper trays and
additional removed paper trays.
Lift the front of the tray, and slide
it carefully into the printer until it
stops.
ZKEM120E
ZKEM130E
ZKDY150J
CassisP1GBmaintenance-F2_FM.book Page 7 Fr iday, May 23, 2003 10:04 AM