F
AXING
4.16

Sending a Fax using a One-touch Number

1
Load the document(s) face down into the ADF.
For details about loading a document, see page 4.5.
2
Adjust the document resolution to suit your fax needs. See
page 4.6.
If you need to change the darkness, see page 4.3.
3
Press the one-touch button where you stored a number.
The document scans into the memory.
4
The machine dials the fax number stored in the one-touch
dial location and the document is sent when the remote fax
machine answers.
Speed Dialing
You can store up to 150 frequently-dialed numbers in one, two
or three-digit speed dial locations (0-149).

Storing a Number for Speed Dialing

1
Press Phone Book on the control panel.
2
Press Phone Book or the scroll button ( or ) to display
“Store&Edit” on the bottom line of the display. Press Enter.
3
Press Enter when “Speed Dials” appears on the display.
If you want to use one-touch dial buttons from 21 to 40,
press and hold down the one-touch dial button
for about 2 seconds.
The display prompts you to enter a location number,
showing the first available number.
4
Enter a one or two-digit speed dial number between 0 and
149, using the number keypad or scroll button ( or )
and press Enter.
If a number is already stored in the location you chose, the
display shows the number to allow you to change it. To start
over with another speed-dial number, press Upper Level.