![](/images/new-backgrounds/1209354/20935427x1.webp)
OPERATION
WARNING: |
|
Do not allow familiarity with products to make you |
|
careless. Remember that a careless fraction of a |
|
second is sufficient to inflict severe injury. | EXTENSION ARM |
|
WARNING:
Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purpose listed below:
To provide a stable, secure work surface for a miter saw
ADJUST IN - OUT
|
| EXTENSION |
|
| ARM LOCKING |
| TIGHTEN | LEVER |
|
| |
| LOOSEN | |
|
| Fig. 18 |
LATCH ON | PULL LEG |
|
UNDERSIDE | EXTENSION OUTWARD | HINGE |
|
| POINT |
| RELEASE |
|
| BUTTON |
|
USING THE EXTENSION ARMS AND SUPPORT LEGS
See Figures 18 - 19. | PULL |
Use the extension arms when working with larger workpieces. | LEG DOWN |
| |
Both extension arms may be adjusted to provide maximum |
|
workpiece support. |
|
To extend the extension arms:
Loosen the extension arm locking lever.
Extend the extension arm to the desired position. Tighten the extension arm locking lever.
To extend the support legs:
Press latch at end of extension arm and pull leg outward |
| |
from arm until hinge is fully exposed. The leg will bend |
| |
at hinge and face in a downward position. |
| |
Press and hold latch in middle of support leg. Extend |
| |
adjustment leg completely to the ground. |
| |
To retract extension arms and support legs: | EXTENSION | |
Press and hold latch in middle of support leg to release | ARM LOCKING | |
LEVER | ||
adjustment leg. Push adjustment leg into support leg until |
| |
it locks into place. |
| |
Push release button on hinge and rotate support leg into | LATCH | |
horizontal position. Push support leg into extension arm | ||
| ||
until locked into position. |
|
Unlock the extension arm locking lever.
Push extension arm fully into stand for storage.
Lock the extension arm locking lever.
EXTENSION
ARM
SUPPORT LEG
ADJUSTMENT
LEG
ADJUST LEG |
|
EXTENSION UNTIL STABLE | Fig. 19 |
14