GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

n Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

nDo not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

nKeep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

nDouble insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.

Double insulation eliminates the need for the three- wire grounded power cord and grounded power supply system.

nAvoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

nDon’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec- tric shock.

nDo not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

nWhen operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

nStay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

nDress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

n Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

nRemove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

nDo not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

nUse safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

nDo not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

nDo not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

nUse clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

nDo not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

nDo not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

nDisconnect the plug from power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

nStore idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

nMaintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

nCheck for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

nUse only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

nKeep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when clean- ing. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Fol- lowing this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

3

Page 2 Page 4
Page 3
Image 3
RIDGID R3001 manual General Safety Rules, Work Area, Electrical Safety, Personal Safety, Tool USE and Care
Page 2 Page 4

R3001 specifications

The RIDGID R3001 is a versatile and powerful cordless reciprocating saw designed for both professional contractors and DIY enthusiasts. Known for its durability and performance, this tool embodies the quality that RIDGID is synonymous with.

One of the standout features of the R3001 is its robust motor, which delivers impressive cutting speeds and allows users to tackle a variety of materials, from wood to metal. The saw is capable of delivering up to 3,000 strokes per minute, enhancing cutting efficiency and allowing users to complete their tasks faster. Coupled with its 1-1/8-inch stroke length, the R3001 ensures clean and aggressive cuts in even the toughest materials.

The design of the R3001 incorporates an ergonomic handle, providing a comfortable grip that reduces fatigue during prolonged use. The tool is also equipped with an adjustable shoe, allowing users to maximize blade usage and control cutting depths more effectively. This level of precision is crucial for achieving accurate cuts in various applications.

A significant innovation in the R3001 is its tool-free blade change system, which enables quick and hassle-free blade swaps without the need for additional tools. This feature not only saves time but also ensures that users can swiftly adapt to different cutting tasks. The saw is compatible with a wide range of blades, further enhancing its versatility.

Safety is another priority with the RIDGID R3001. The tool comes with a built-in electric brake that stops the blade quickly when the trigger is released, minimizing the risk of accidents. Additionally, it features a lightweight design, which, combined with its balance, makes it easy to maneuver in tight spaces.

The R3001's battery compatibility allows it to work seamlessly with other RIDGID 18V tools, making it a great addition to any toolkit. With features like an integrated LED work light, users can illuminate dark work areas, improving visibility and accuracy during cuts.

In summary, the RIDGID R3001 is a powerful and feature-rich reciprocating saw that excels in versatility, comfort, and safety. Its durable construction and innovative technologies make it an ideal choice for anyone seeking reliability and efficiency in their cutting tasks. Whether for heavy-duty construction work or home improvement projects, the R3001 stands out as a top-tier tool in its category.
Top Page Image Contents