FEATURES
KNOW YOUR CIRCULAR SAW
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
BEVEL ADJUSTMENT KNOB
The bevel adjustment knob allows you to set the circular saw for bevel cuts from 45° to 90°.
CHARGER
Your charger has a “key hole” hanging feature for convenient, space saving storage. Screws should be installed so that the center distance is
DEPTH ADJUSTMENT KNOB
The depth adjustment knob adjusts the depth of cut from 0 in. to
ERGONOMIC DESIGN
This tool is designed for comfort and ease of operation in different positions and at different angles. The design of your circular saw helps maintain proper
HEX KEY STORAGE
Conveniently stores your hex key for quick blade changes.
The
SPINDLE LOCK
The spindle lock allows you to secure the blade when turning the blade screw.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can be used to measure up to 4 in. on the right side of the blade, and up to 1 in. on the left side of the blade.
EDGE GUIDE
The edge guide is used when making long or wide rip cuts with the saw.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
Battery Pack
Saw Blade
Hex Key Edge Guide Tool Bag Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
10
