AC9940 | Specifications | Features | Includes | Weight |
24603 |
| • Quick | Miter saw stand, mounting hardware | Tool Weight: 92 lbs. |
Miter Saw |
| • Folds Up Easily – with miter saw attached for two wheel transportation | and operator’s manual |
|
and upright storage
• Wide Base with
• Heavy Duty – welded steel construction, built
• Large Rubber Wheels – provide superior mobility over rough terrain
• Extra Wide Steel Rollers – adjust to over 8' for maximum workpiece support
• Fits Most Miter Saws – mounting holes provided for RIDGID® models
• Quick and Easy Assembly – merely mount wheels and roller supports
TP1300LS | Specifications | Features | Includes | Weight |
14673 | Input: 15 Amp, 120V | • 15 Amp/120V Motor with Overload Protection | Thickness planer, blade changing tools, | Tool Weight: 85 lbs. |
13" Thickness Planer | Cutterhead Speed: 9,000 RPM | • 13" x 6" Cutting Capacity | blade storage case, extra set of dual edge |
|
| (no load) | • Snipe Reduction with |
|
|
| Cuts Per Minute: 18,000 | • Super Fine Finish with 66 Cuts per Inch |
|
|
| (no load) | • |
|
|
| Feed Rate: 26 FPM (no load) | • |
|
|
| Capacity: 13" x 6" | before each pass |
|
|
| Max. | • |
|
|
|
| plane workpieces to desired thickness up to 1 3/4" thick |
|
|
•Cord Wrap – keeps cord out of the way when planer is not in use
•
•
•Large Infeed/Outfeed Tables – extra support for large workpieces
•Upper and Lower
TS2400LS | Specifications | Features | Includes | Weight |
14648 | Input: 15 Amp 120V | • “T" Slot Miter Gauge and Slots – provide additional accuracy for | Table saw, | Tool Weight: 122 lbs. |
10" Portable Table | No Load Speed: 4,000 RPM | • Quick Change Blade Guard – easily removed or replaced without tools* | tooth blade, rip fence, miter gauge, wrenches |
|
| Blade Diameter: 10" | • | and operator’s manual |
|
| to the blade, provides 25" rip capacity while maintaining portability |
|
| |
| • Includes |
|
| |
| Rip Capacity: 25" right of | Unfolds to a convenient, sturdy saw platform |
|
|
| blade; 12" left of blade | • Single Handle Bevel/Height Adjustment – for quick, easy blade adjustments |
|
|
•15 Amp Motor – heavy duty power with soft start and overload reset
•
TS3650 | Specifications | Features | Includes | Weight |
14633 | Input: TEFC 13/6.5 Amp | • Toolless Blade Guard – can be easily removed or replaced* | Base, miter gauge, carbide tipped manual | Tool Weight: 287 lbs. |
10" Cast Iron Table Saw | Blade Diameter: 10" | • 40 Tooth Carbide Blade – for fast ripping and smooth crosscuts | and rail set |
|
| • |
|
| |
| • Rugged and Precise Rip Fence Design with |
|
| |
| Rip Capacity: 36" right of blade; | capacity for ripping wider material |
|
|
| 12" left of blade | • Up Front Controls – for easier access |
|
|
| No Load Speeds: 3,450 RPM | • |
|
|
|
| • TEFC (Totally Enclosed Fan Cooled) Motor™ – keeps dust and debris out |
|
|
|
| of motor to extend life |
|
|
|
| • Cast Iron Extensions with Clamping Surface – allow jigs and featherboards |
|
|
|
| to be clamped in place easily |
|
|
Pneumatic
R150FSA | Specifications | Features | Includes | Weight |
21183 | Fastener Type: narrow crown | • Powerful | R150FSA Finish Stapler, case, 1,000 staples, | Tool Weight: 2.6 lbs. |
1 1/2" Finish Stapler | Fastener Diameter: 18 gauge | on work surfaces | 2 |
|
| Staple Crown: 1/4" | • | and operator’s manual |
|
| Fastener Range: 3/8" – 1 1/2" | surfaces with |
|
|
| Magazine Capacity: 110 staples | • |
|
|
| Length x Height: 9 3/4" x 9 5/8" | the exhaust where you want it |
|
|
|
| • 2 |
|
|