WD1200/30 RIDGID MANUAL (12001 3/16/01 4:23 PM Page 8
Operation
WARNING
To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to; lighter fluid, solvent type cleaners, oil- base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to; coal, magnesium, grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not use this vac as a sprayer. To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials.
CAUTION: To reduce risk of hearing damage wear ear protectors when using the vac for extended hours or when using it in a noisy area. The operation of any utility vac can result in foreign objects being blown into the eyes, which can result in severe eye damage. Always wear safety goggles complying with ANSI Z87.1 (or in Canada CSA
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a quali- fied electrician to install the proper outlet. Do not change the plug in any way.
After you plug the power cord into a 120V outlet, turn the Wet/Dry Vac on by push- ing the switch from “OFF” to “ON”. Familiarize yourself with the accessories included with the vac. Each accessory may be used in various ways for vacuum- ing and blowing debris. Here is a list of the accessories and their uses.
Utility Nozzle - General purpose nozzle for most vacuuming applications.
Wet Nozzle - Used for wet pickup on smooth surfaces to pick up liquid and dry the surface in one stroke.
Car Nozzle - Dry pickup nozzle for car interiors and most upholstery cleaning.
Extension Wands - These wands can be connected together and provides addi- tional length for more reach.
Hose - Provides transfer of vacuum or blowing capability to work site. Provides the means of attaching extension wands, and nozzles.
Vacuuming Dry Materials
1.The filter must always be in correct position to avoid leaks and possible damage to vac.
2.When using your vac to pick up very fine dust, it will be necessary for you to empty the drum and clean the filter at more frequent intervals to maintain peak vac performance.
NOTE: A dry filter is necessary to pick up dry material. If you use your vac to pick up dust when the filter is wet, the filter will clog quickly and be very difficult to clean. 3.If your filter is wet but you need to use the
vac to pick up dry material, you can quickly dry the filter by running the vac without hose attached for about 10 minutes. The clean air rushing through the vac will help dry the filter.
8
