Rival DC-TB170 instruction manual Speed

4.Set Jar into place on Blender Base, making sure it is securely seated by twisting jar clockwise until it snaps into the locked position.

5.Plug cord into outlet.

6.Put ingredients in Jar, place Lid on Jar.

7.Process food or beverages. Place hand on Lid when blending liquids. Push button on Control Panel to start Blender.

8.Always turn blender OFF and wait until blades have stopped rotating before removing Jar.

9.To remove Jar after blending is complete, hold blender base with one hand and grasp jar handle with the other hand and twist jar counter clockwise approximately a quarter turn to unlock, then lift jar straight up from base.

10.Never place Jar onto unit while motor is running.

6-SPEED

Speeds are Chop, Mix, Grate, Blend, Liquefy, and Pulse/Off. Pulse is a controlled cycle operation. This means it operates only while the button is held down. All other speeds are continuous cycle operation. They operate continuously at whatever speed is selected until the "Off" button is pressed.

Select the appropriate speed setting for your task: Press the “OFF” button when finished.

Chop

Mix

Chop garlic, herbs, onions—pulse to chop evenly

Prepare pancake or waffle batter

Reconstitute frozen juice

Milk shakes

Cocktails

Grate	Finely chop cabbage, carrots or other vegetables (add
	½ to 1 cup water and pulse to chop, then drain.)
	Grate chunks of cheese (Cut cold cheese into ½ to
	1-inch chunks, place ½ cup cheese chunks into blender
	and pulse to chop. Very hard cheese, such as Parmesan
	should be at room temperature for chopping.)

5