Rival DC-WM169 instruction manual User Maintenance Instructions, Cleaning, How to make waffles

How to make waffles

1.Always preheat before use. Plug cord into a rating 120-volt AC power outlet while preparing the fillings.

2.The indicator light will illuminate when the plug is connected to the main outlet;it will stay on during preheating. The indicator light shuts off when appliance is preheated (preheat appliance for approximately 2 minutes).

CAUTION: Always preheat before use.

3.When the appliance has heated to the appropriate temperature, the indicator light will come off, and the appliance is ready for use.

4.Pour batter dough evenly in the center of the bottom cooking plate. It is recommended that 2.5 oz. of batter be used to make the waffles.

5.Close the Waffle Maker by lowering the upper plate onto the lower plate.

6.During baking, the indicator light will come on and off intermittently so that the correct temperature is maintained.

7.The waffle will be ready in 4 to 6 minutes (or longer depending on personal preference). Do not open the Waffle Maker during the first minute of cooking. The waffles are ready when steam stops escaping.

CAUTION: The appliance is not to be operated in the open position.

8.Once the waffles are cooked, carefully remove them, use a wooden or plastic spatula to remove waffle from the baking plate. Make sure not to touch the cooking surface with sharp, pointed or metal objects, this could damage the non-stick surface.

9.After use, disconnect the plug from power outlet and allow the Waffle Maker to cool down.

CAUTION: Cooking surface is hot, do not touch until it cools down thoroughly.

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Refer it to qualified personnel if servicing needed.

CLEANING

ŸAlways unplug this Waffle Maker from power source and wait until it cools down before cleaning.

ŸThere is no need to take your Waffle Maker apart for cleaning. Dry with a paper towel to absorb excess oil. Brush crumbs from the grooves, and wipe with damp cloth and mild soap.

ŸNever immerse in water. Avoid using scratching or sharp utensils, as they will scratch the non-stick surface.

5