-2-
When using electrical appliances, basic safety precautions should
always be followed, including the following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use HANDLES or KNOBS.
3. To protect against electrical shock, do not immerse CORD, PLUG or
TEMPERATURECONTROL PROBE in water or other liquid.
4. Close supervision is necessary when any appliance is used near
children. This appliance is not to be used by children.
5. Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning.
6. Do not operate any appliance with a damaged CORD or PLUG or after
the appliance malfunctions or has been damaged in any manner.
Return appliance to Rival®(see warranty) for examination, repair,
or adjustment.
7. The use of accessory attachments not recommended by Rival®may
cause injuries.
8. Do not use outdoors.
9. Do not let CORD hang over edge of table or counter, or touch
heated surfaces.
10.Do not place on or near a hot gas or electric burner, or in a
heated oven.
11.Extreme caution must be used when moving appliance containing
hot oil or other hot liquids.
12.Always attach TEMPERATURE CONTROL PROBE to appliance first, then
plug CORD in the wall outlet. To disconnect, turn TEMPERATURE
CONTROL DIAL to OFF, then remove plug from wall outlet.
13.Do not use appliance for other than intended use.
IMPORTANT SAFEGUARDS
-3-
SAVE THESE INSTRUCTIONS
This appliance is for HOUSEHOLD USE ONLY.No user-serviceable parts
inside. Do not attempt to service this product.
A short power supply cord is provided to reduce the hazards resulting
from entanglement or tripping over a long cord. An extension cord may
be used with care; However, the marked electrical rating should be at
least as great as the electrical rating of the skillet. The extension cord
should not be allowed to drape over the counter or tabletop where it can
be pulled on by children or tripped over unintentionally.
KEEP WARM SETTING
The TEMPERATURE CONTROL PROBEhas a Warm setting of approxi-
mately 160° to 180°F. The indicator light will cycle on and off when this
setting is in use to indicate that the skillet is maintaining the desired tem-
perature.
IMPORTANT
Check the HANDLES/LEGS of your skillet periodically for looseness. If
needed, re-tighten with a screwdriver. CAUTION:Overtightening can
result in stripping of screws or cracking of handles and base.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely into
the AC outlet or if the AC outlet feels warm do not use that outlet.
S12 GN/428-0938/ENG/FRE 1/20/03 4:09 PM Page 4