Installation & Operation
Changing the Frequency
Scanning for available FM/AM/HD channels
1.Press the SCAN button to scan for available analog FM/AM channels and/or digital
HD channels, one after one, till you find your favorite station.
2.Press and hold the SCAN button for less than 2 seconds, it will search forward for the next strongest frequency, then stop.
3.Press and hold the SCAN button for more than 2 seconds, it will search backward for the next strongest frequency, then stop.
Manual Tuning
1.Press the BAND button to select either AM or FM.
2.Change the frequency with the “+” or “-” button.
Saving Preset Stations
To save a frequency in your radio’s memory, complete the following steps:
1.Press the BAND button to select either AM or FM.
2.Press the SCAN button until you find a station you want to save as a pre-set.
3.Press the PRESET button to start setting up Preset. You will see P01 - P10, press either the “+” or “-“ button to navigate the pre-set list.
4.Stop at one of the pre-set numbers (P01-P10) on the list, then press the PRESET button to assign the frequency you have tuned to that pre-set number.
Note: Your radio provides 10 preset positions for each band, AM or FM, for a total of 20.
Selecting Preset Station
To select a Preset Station saved in your radio’s memory:
1.Press the BAND button to select either AM or FM.
2.Press the PRESET button, you will see the the first pre-set on the list P01, and the frequency will be blinking.
3.Press “+” or “-“ to go up or down the list until you find the pre-set you wish to tune to, for example P05 FM100.7,
4.Press the ENTER button. Then the radio will tune to the frequency stored at that pre-set. You can change the station saved to any pre-set by saving a different station to that pre-set number.
Enter Button
Press the ENTER button to see the data from the HD Radio broadcaster, including <Art- ist>; <Song Name>, <Signal Strength Indicator>, <Frequency>, <Scrolling Text> etc.
Menu Button
Press Menu button repeatedly to access the Display or Scan Menus:
1.Display – Choose between FIXED or SCROLLING text on the display.
2.Scan – Choose between scanning ALL channels or HD channels only.
Press the ENTER button again to return to the display to normal.
Multicast Channels
In addition to digital sound quality, FM HD Radio broadcasters can offer multiple pro- gramming channels simultaneously using their existing frequency on the radio dial. These additional channels can offer expanded news, talk and music formats. When your radio tunes in the HD Radio channel, if a number appears on the right side of the station frequency (for example: 89.3-1) this indicates the existence of multicast services. Use the TUN-/+ to select a multicast channel for the frequency.
System Delay
Digital systems inherently produce an audio delay. To overcome this delay, HD Radio technology uses a station’s analog signal to enable fast tuning of an AM or FM sta- tion. After approximately 5 seconds, the audio from the analog signal changes to a digital HD Radio signal. If the radio station has implemented the HD Radio broadcast correctly, the blend is smooth. However, if the station has not, you will experience a skip in content of up to 5 seconds for a - 2 or higher channel.
This is not an issue with your HD Radio receiver. This is an HD Radio broadcaster’s implementation issue, which should be corrected by the station over time. Today’s analog is only present on the main channel. Should you tune directly to a station’s multicast channel, the HD Radio Adaptor will delay playing audio or content for up to 5 seconds. This is a normal operation.
GIVE US A CALL, WE'LL HELP YOU INSTALL.
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
1-800-445-1797
Frequently Asked Questions
Q. Why does my audio quality change after a few seconds on some HD Radio sta- tions?
A. HD Radio stations blend analog signals to the digital HD Radio signal. The blend is typically smooth, but in some cases, the audio quality can take a few seconds to reach enhanced digital levels. This is not an issue with your HD Radio receiver it is the broadcaster’s HD Radio implementation.
Q. Why is the display lit and showing information, but there is no sound?
A. Your FM stereo receiver may be muted, or the Auxiliary In jack is not enabled.
Q. What can I do if my audio is distorted or I don’t hear any radio?
A. Keep the power cable away from the radio and antenna while in use. Make sure the FM antenna and power cable are not touching each other or the radio (except where they connect to the radio).
If your radio is still distorted or you don’t hear any audio, you may be experiencing one of the following conditions:
•Is the radio muted? If so, unmute the radio or turn up the volume.
•Is the radio in AUX mode? If so, your auxiliary device may not be sending audio signals or may not be correctly connected.
•Change your vehicle’s location.
•Check all connections, including the power and antenna.
•The signal is too weak, tune to a stronger station or move your vehicle.
•If you are using an amplified antenna with adjustable gain, turn down the gain all the way and adjust slowly upward.
NOTES
SPECIFICATIONS
General | Analog FM/AM/RDS and Digital HD Radio Receiving |
Frequency Range | AM 530~1710 KHz, FM 87.9~108 MHz |
Tuner Sensitivity | AM -87 dBm , FM -91 dBm |
Input Connector | DC IN, ANT IN, |
Output Connector | ANT OUT, LINE OUT |
Control Functions......Power, Band, Enter, Auto, Tuner +, Tuner -, Scan, Menu, Preset
LCD Display | 16 x 2 characters with backlight |
Antenna | Car ANT Socket |
Power Supply | DC 12 ~ 14.4 Volt |
Dimensions | Display 130mm (W) x 35mm (H) x 15mm (D) |
Please read this user’s manual before installing, setting up, or using your new HD Radio receiver.
FCC & Industry Canada Information
WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules, and applicable Industry Canada regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of device.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifictions to this equipment. Such modifications could void the user’s authority to operate this equipment.
(For Canada)
This Class A/B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Limited Warranty
Virtual Reality Video Labs® warrants, to the original purchaser, that its products are free from defects in material and workmanship for 30 days from the date of original purchase, as part of our commitment to product excellence. Virtual Reality Video Labs® and/or its affiliates routinely improve the designs, materials or production methods of its existing products. Because it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.
CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective, Virtual Reality Video Labs® will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:
1.All repairs must be performed by Virtual Reality Video Labs® and/or its affiliates in Eatontown, New Jersey.
2.The equipment must not have been altered or been damaged through negligence, accident, or improper opera- tion.
3.The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.
4.All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5.Repair or replacement parts supplied by Virtual Reality Video Labs® under this warranty are protected only for the unexpired portion of the original warranty.
6.In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, ac- cessories or car electrical systems.
7.Virtual Reality Video Labs® will not be responsible for any charge incurred for installation.
OWNER’S RESPONSIBILITIES:
Virtual Reality Video Labs® will make every effort to provide warranty service within a reasonable period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.
In order to provide you with the proper warranty service, we request that you adhere to the following procedure:
1.Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.
2.If it is necessary to return your product for service, please return it securely packed, preferably in the original ship- ping carton, and freight and insurance prepaid to the following address: Virtual Reality Video Labs, Service Depart- ment, 41 James Way, Eatontown, New Jersey 07724.
3.Please include a detailed explanation of the problem you are having.
4.If your product is found by Virtual Reality Video Labs® to have a defect in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw Virtual Reality Video Labs® liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.
Virtual Reality Video Labs® makes no other warranty of any kind, expressed or implied; and all implied warranties, are hereby disclaimed by Virtual Reality Video Labs® and excluded from this warranty, Virtual Reality Video Labs® and/or its affiliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product.
As part of our commitment to excellence in Virtual Reality Sound Labs® products, Intellectual Solutions and/or its affiliates routinely improve the designs, materials or production methods of its existing products. Because it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.
This product is covered by one or more of the following U.S. Patents: 5278826; 5278844; 5315583; 5465396; 5517535; 5559830; 5566214; 5579345; 5633896; 5646947; 5703954; 5745525; 5764706; 5809065; 5828705; 5850415; 5878089; 6108810; 6148007; 6178317; 6259893; 6292511; 6295317; 6317470; 6345377; 6400758; 6430227; 6452977; 6480536; 6487256; 6510175; 6523147; 6532258; 6539063; 6549544; 6556639; 6563880; 6570943; 6590944; 6622008; 6639949; 6671340; 6891898; 6895060; 6898249; 6901242; 6970685; 6982948; 7043681; and 7127008
HD RadioTM Technology Manufactured Under License From iBiquity Digital Corp. US and Foreign Patents. HD RadioTM and the HD RadioTM logos are proprietary trademarks of iBiquity Digital Corp.
©2007 Intellectual Solutions, Inc., All Rights Reserved.All designs, logos and images are the exclusive property of Intellectual Solutions, Inc. and/or its affiliates. All rights reserved. 121907 Printed in China 00000
