Roberts Radio CR950 Setting the Alarm Time, Waking Up to Radio, Waking Up to Buzzer, Sleep Timer

Setting the Alarm Time

To set the alarm time, press and hold down the Alarm 1 (17) or Alarm 2 (16) buttons and adjust using the forward (18) or reverse (20) buttons until the required time appears.

Waking Up to Radio

Set the alarm time as previously described. Switch on the radio and tune into the required station. Make sure that the station will be broadcasting at the time you wish to wake up. Set the volume control to the level of sound you wish to wake up to. Set the Alarm 1 (4) or Alarm 2 (8) function selector to the Radio position. The corresponding Alarm 1 or Alarm 2 indicator will light.

The radio will turn on every day at the preset time for 60 minutes. To turn off the alarm until the next day press the On/Off button (15).

Waking Up to Buzzer

Set the alarm time as previously described. Set the Alarm 1 (4) or Alarm 2 (8) function selector to the Buzz position. The corresponding Alarm 1 (11) or Alarm 2 (12) indicator will light.

The Buzzer will sound every day at the preset time for 60 minutes. To turn off the alarm until the next day press the On/Off button (15).

Note:

If the alarm is not required, set the Alarm 1 or Alarm 2 function switch to the Off position. The alarm indicator will disappear.

The Radio and Buzzer alarms will continue to operate during a mains power failure.

Automatic Weekend Alarm Cancellation

The alarm can be automatically cancelled at weekends (Week-end- Cancellation). To enable the Week-end-Cancellation function, press the W.E.C button (13). The W.E.C. indicator (2) will light. Press the W.E.C. button again to turn off the indicator and disable this function.

If you need any further advice, please

call our Technical Helpline on

0181 758 0338 (Mon-Fri)

Snooze Control

The radio or buzzer alarm can be silenced for 5 minutes by pressing the Snooze button (1). This sequence can be repeated within the 60 minute alarm period.

Sleep Timer

The radio can be set to turn off after a preset time has elapsed.

Repeatedly press the sleep button (14) until the desired time is reached (maximum 90 minutes in 10 minute steps). The radio will switch off after the sleep time has elapsed.

The radio can be turned off at any time by pressing the On/Off button.

Dimmer Switch

The brightness of the clock display can be adjusted using the dimmer control (21) located on the underside of the CR950.

Battery Backup

The time and alarm settings will be retained during a temporary failure of the AC mains supply. The LED display will not be operational but the Radio and buzzer alarms will continue to operate at their preset times.

6