Replacing previously programmed tracks
1.Whilst the CD is in STOP, repeatedly press the Mode button until the display shows the program step you wish to replace.
2.Select the required track using the F.Fwd or F.Rev buttons.
3.Press the Mode button to store the change.
Erasing a programme
1.Whilst the CD is in STOP, press the Mode button. The Programme indicator will flash.
2.Press the Stop button to erase the programme. Programmes are also erased by:- Opening the CD door, moving the Function switch to the 'Radio' position and if the power supply is interrupted in any way.
Alarm operation
Your clock radio has three alarm types, CD, Radio and Buzzer. The alarms gradually increase in volume. This function is known as Progressive Alarm System.
Setting the alarm time
1.Press and hold down the Alarm 1 or Alarm 2 buttons. Whilst holding down the Alarm 1 or Alarm 2 buttons set the alarm time using the F.Fwd or F.Rev buttons.
The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
If you need any further advice, please call our Technical Helpline on :- | 12 | |
020 8758 0338 | ||
|