Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your | 1 |
| |
CD clock radio has 2 separate alarms which can be set to activate at | 0FF · |
different times. | ON · |
Setting Alarm 1 | ADJ · |
|
1. Slide the Alarm 1 function switch to the 'Adj' position.
2. Press the B.Skip button to set minutes and the F.Skip button to | 2 | |
set the hour. Release the buttons when the correct time is reached. | ||
| ||
The clock uses a 12 hour display with a PM indicator. Ensure that |
| |
the correct 12 hour cycle is selected. |
| |
3. Return the Alarm 1 function switch to the 'Off' position. The |
| |
display will revert to showing time and the Alarm 1 indicator will | 1 | |
go off. |
| |
Note: Incorrect display will result if both the Alarm function switches | 0FF · | |
are set to the 'Adj' position. | ON · | |
ADJ · | ||
|
1
2 
3
Setting Alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position.
2. Press the B.Skip button to set minutes and the F.Skip button to set the hour. Release the buttons when the correct time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
2
3. Return the Alarm 2 function switch to the 'Off' position. The display will revert to showing time and the Alarm 2 indicator will go off.
2
0FF · ON ·
ADJ ·
1
2 
2
0FF · ON ·
ADJ ·
3
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 12 |
|
