Using the AC adaptor
Your radio is supplied with a Mains Adaptor.
1.Place your radio on a fl at surface.
2.Insert the adaptor plug into the DC socket located on the left hand side of your radio.
3.Plug the adaptor into a standard 13 amp mains socket outlet. Whenever the adaptor is used with the radio, it will take power from the mains rather than from the batteries.
The AC adaptor should be disconnected from the mains supply and the radio when not in use.
•IMPORTANT: The mains adaptor is used as the means of connecting the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.
Lock switch
The Lock switch is used to prevent unintentional operation of your radio.
1.Set the Lock switch located on the side of your radio to the 'Lock'
position 
. The power and all other buttons will be disabled, this will prevent accidental operation when your radio is packed in a suitcase or travel bag.
2.To release the lock, slide the Lock switch down to the 'Unlock' position 
.
If you need any further advice, please call our Technical Helpline on :-
DC 7.5V 800mA
020 8758 0338
6
